• Home
• GR Corporate
• Products
• Markets
• Customer Support
• Distributor Locator
• What's New
• Events Calendar
• About Us
• Contact Us

Magnetic Drive Pumps

Pump Specifications:
Flow Rates - Range to 3.75 gpm; maximum head 13 feet. Maximum system pressure is 75 psi.
Motors - 115V, 50/60 Hz; 230V, 50/60 Hz Open, shaded pole, impedance protected, sleeve bearing • 12VDC
Fluid Temperature - To 203^°F (95^°C)

Materials in Contact with Solution:
Body & Housing - Vectra^®* (15651-054, -055, -056, -057) • Noryl^®
Impeller - Vectra^®*
Bearings - Vectra^®*
Pump Shaft - Ceramic
Thrust Bearings - Glass-Filled Teflon^®
O-Rings (Elastomers) - EPT/EPDM • Viton^®/Fluoroelastomer

^*Vectra^® is chemically resistant to most acids, oxidants and bleaches, and organic solvents. (Do not use with chemicals which are bases.)

Features
•	Corrosion resistant	•	Dry run capability
•	Hydraulically efficient	•	Quiet operation
•	No shaft seals	•	Flexible mounting and body discharge positions
•	Low current draw and heat rise	•	NSF certified models available

Typical Performance

Model Specifications
Model Number	Voltage (Type)	Amps	Body Material	O-Ring Material	Connections Inlet/Outlet	Curve (50Hz/60Hz)
15651-050	115 VAC	.45	Noryl®	EPT/EPDM	1/2" MHB	B / A
15651-051	115 VAC	.45	Noryl®	Viton®/FKM	1/2" MHB	B / A
15651-052	230 VAC	.22	Noryl®	EPT/EPDM	1/2" MHB	B / A
15651-053	230 VAC	.22	Noryl®	Viton®/FKM	1/2" MHB	B / A
15651-054	115 VAC	.45	Vectra®	EPT/EPDM	1/2" MHB	B / A
15651-055	115 VAC	.45	Vectra®	Viton®/FKM	1/2" MHB	B / A
15651-056	230 VAC	.22	Vectra®	EPT/EPDM	1/2" MHB	B / A
15651-057	230 VAC	.22	Vectra®	Viton®/FKM	1/2" MHB	B / A
15651-058	12 VDC	.63	Noryl®	EPT/EPDM	1/2" MHB	C
15651-059	12 VDC	.63	Noryl®	Viton®/FKM	1/2" MHB	C
15651-076	12 VDC	.63	Vectra®	EPT/EPDM	1/2" MHB	C
15651-077	12 VDC	.63	Vectra®	Viton®/FKM	1/2" MHB	C
15651-072	12V BLDC	1.24	Vectra®	EPT/EPDM	1/2" MHB	D
15651-073	12V BLDC	1.24	Vectra®	Viton®/FKM	1/2" MHB	D
15651-075	24V BLDC	.71	Vectra®	Viton®/FKM	1/2" MHB	D
15652-058	12 VDC	.63	Noryl®	EPT/EPDM	3/8" MPT	C
15652-072	12V BLDC	1.24	Vectra®	EPT/EPDM	3/8" MPT	D
15652-073	12V BLDC	1.24	Vectra®	Viton®/FKM	3/8" MPT	D
15652-075	24V BLDC	.71	Vectra®	Viton®/FKM	3/8" MPT	D
- Vectra® is chemically resistant to most acids, oxidants and bleaches, and organic solvents. (Do not use with chemicals which are bases.) - BLDC = Brushless DC. - HS = High Speed. - Performance @ 50 Hz will be approximately 83% of the performance @ 60 Hz. - FKM = Fluoroelastomer, FPT = Female Pipe Thread, MPT = Male Pipe Thread, MHB = Male Hose Barb

Typical Dimensions

OEM Options

If a model meeting your exact requirements is not listed above, please contact the factory and we will create your pump to your exact application requirements.

Body NSF certified models available

Thrust Bearings Reinforced Thermoplastic Resin Vectra®*

O-Rings (Elastomers) Nitrile Neoprene Silicone Kel-F®

Motors 115V, 50/60 Hz; 230V, 50/60 Hz Open, shaded pole, impedance protected, ball bearing Brush and brushless DC available