Integrated Brushless DC Magnetic Drive Pumps

INTG2 Series

Special Features
• Brushless DC motor operates on power supplies ranging from 9 to 27 volts.
• Built-in Speed Control gives OEMs the flexibility to adjust the pump’s motor speed in order to meet system’s specific pressure and flow requirements.

Specifications*
• Motors: 9-27V, Integrated Brushless DC
• Inrush Current: Ramps up to running current
• Maximum System Pressure: 75 psi.
• Flow Rates: up to 7.5 GPM; max head 70 feet.
• Weight: 10 oz (283.50 grams)
• Max Fluid Temp: 203°F (95°C)
• Dimensions: 2.57”W x 3.29”H x 3.42”L

Wetted Materials
• Pump Body: PPS (Ryton®)
• Housing: PPS (Ryton®)
• Impeller: PPS (Ryton®)
• Rotor Shell: PPS (Ryton®)
• Static O-Rings: FKM (Viton®), EPDM
• Pump Shaft: PPS Zirconia
• Bearing Plate: PPS/TFE (Ryton/Teflon)

Options
• 0-5 volt remote third wire speed control
• Multiple inlet/outlet configurations

^{*Please Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown.}

Click to download INTG2 Technical Sheet

INTG3 Series

Brushless DC motor operates on power supplies ranging from 9 to 27 volts.

Specifications*
• Motors: 9-27V, Integrated Brushless DC
• Inrush Current: Ramps up to running current
• Maximum System Pressure: 75 psi.
• Flow Rates: up to 5.1 GPM; max head 33 feet.
• Weight: .8 lbs (362.874 grams)
• Max Fluid Temp: 203°F (95°C)
• Dimensions: 2.59”W x 3.29”H x 4.06”L

Wetted Materials
• Pump Body: PPS (Ryton®)
• Housing: PPS (Ryton®)
• Impeller: PPS (Ryton®)
• Rotor Shell: PPS (Ryton®)
• Static O-Rings: FKM (Viton®), EPDM
• Pump Shaft: PPS Zirconia
• Bearing Plate: PPS/TFE (Ryton/Teflon)

Options
• 0-5 volt remote third wire speed control
• Optional Built-in Speed Control
• Multiple inlet/outlet configurations

^{*Please Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown.}

Click to download INTG3 Technical Sheet

INTG1 Series

Specifications*
• Motors: 12V, Integrated Brushless DC
• Maximum System Pressure: 75 psi.
• Flow Rates: 2 GPM; max head 12 feet.
• Weight: 10 oz (283.50 grams)
• Max Fluid Temp: 180°F (82°C). Consult factory for higher temperature requirements.
• Dimensions: 2.82”W x 3.25”H x 3.48”L

Wetted Materials
• Pump Body: PPO, LCP
• Pump Adapter: PP, LCP
• Impeller: LCP
• Front Thrust Bearing: Teflon
• Impeller Shaft: Ceramic
• O-Ring: EPDM, FKM

Options
• 0-5 volt remote third wire speed control
• Multiple inlet/outlet configurations
• Submersible

^{*Please Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown.}

Click to download INTG1 Specsheet